Performing Initial Settings - Sony HT-A5000 Mode D'emploi

Performing Initial
Settings
1
Press  (power) on the remote
control supplied with the speaker
system to turn on the speaker
system.
Operate the remote control by
pointing it toward the front of the
bar speaker.
When the speaker system turns on,
[TV] appears in the front panel
display.
PLEASE WAIT
2
Turn on the TV.
 (power)
/// (up/
down/left/
right),
(enter)
HOME
TV
3
Press HOME, then perform initial
settings by following the on-
screen instructions.
Initial settings screen
• Press /// (up/down/left/
right) and
item as instructed on the screen.
• Once [Setup is complete.] appears,
select [Finish].
Note
Depending on the order in which you turn
on the TV and the speaker system, the
speaker system may be muted and
[MUTING] is displayed on the front panel
display of the speaker system. If this
happens, turn all devices off, then turn on
the speaker system after turning on the TV.
(enter) to select the
23
US