Usb Device Connection; Headphones Connection - Sony HT-A5000 Mode D'emploi

USB Device Connection

The USB device is not recognized.
 Try the following:
 Turn the speaker system off.
 Remove and reconnect the USB
device.
 Turn the speaker system on.
 Make sure that the USB device is
securely connected to the
port (page 31).
 Check to see if the USB device is
damaged.
 Make sure that the USB device is
turned on.
 If the USB device is connected via a
USB hub or cable, disconnect it and
connect the USB device directly to the
speaker system.
 When connecting a WALKMAN® or
smartphone, its internal storage or
external storage (such as a memory
card) may not be recognized.
Mobile Device Connection
Pairing cannot be achieved.
 Bring this speaker system and the
BLUETOOTH device closer together.
 Make sure this speaker system is not
receiving interference from a wireless
LAN device, other 2.4 GHz wireless
devices, or a microwave oven. If a
device that generates
electromagnetic radiation is nearby,
move the device away from this
speaker system.
BLUETOOTH connection cannot be
completed.
 Make sure that the BLUETOOTH
indicator of the bar speaker is lit
(page 30).
 Make sure the BLUETOOTH device to
be connected with is turned on and
the BLUETOOTH function is enabled.
 Bring this speaker system and the
BLUETOOTH device closer together.
 Pair this speaker system and the
BLUETOOTH device again. You may
need to cancel the pairing with this
speaker system using your
BLUETOOTH device first.
 Pairing information may be deleted.
Perform the pairing operation again
(page 29).
Sound of the connected BLUETOOTH
mobile device is not output from the
(USB)
speaker system.
 Make sure that the BLUETOOTH
indicator of the bar speaker is lit
(page 30).
 Bring this speaker system and the
BLUETOOTH device closer together.
 If a device that generates
electromagnetic radiation, such as a
wireless LAN device, other
BLUETOOTH devices, or a microwave
oven is nearby, move the device away
from this speaker system.
 Remove any obstacle between this
speaker system and the BLUETOOTH
device or move this speaker system
away from the obstacle.
 Reposition the connected
BLUETOOTH device.
 Switch the wireless LAN frequency of
any nearby wireless LAN router or PC
to the 5 GHz range.
 Increase the volume on the connected
BLUETOOTH device.

Headphones Connection

with the BLUETOOTH
Function
Pairing cannot be achieved.
 Bring this speaker system and the
BLUETOOTH headphones closer
together.
 Make sure this speaker system is not
receiving interference from a wireless
LAN device, other 2.4 GHz wireless
devices, or a microwave oven. If a
device that generates
electromagnetic radiation is nearby,
53
US