Siebert S202 Série Manuel D'utilisation page 28

Display test
In menu item F can be set whether a display test is automatically carried out after
power-on.
Demo operation mode
If in menu item F the setting PlAy is selected, random characters are displayed
one after another. A control of the unit is in this operation mode not possible.
Hold function
An H signal at function input F stops the display, while the input signal is still
evaluated.
Input F is PLC-compatible and dimensioned for the following signal voltages:
L-Signal = -3.5...+5 V, H signal = +18...30 V (active H)
Open input = L signal, M = reference potential
Sensor supply
The units supply terminal P with an auxiliary voltage galvanically isolated from the
power voltage to supply a sensor (24 V ± 20%, max. 50 mA, reference potential = M).
28 BAL S202 ANA M 1.0