Electrolux EES47311L Notice D'utilisation page 26

Problem
Whitish streaks or bluish
layers on glasses and
dishes.
Stains and dry water
drops on glasses and
dishes.
The interior of the appli‐
ance is wet.
Unusual foam during
washing.
Traces of rust on cutlery.
Residues of detergent in
the dispenser at the end
of the programme.
Odours inside the appli‐
ance.
Limescale deposits on the
tableware, on the tub and
on the inside of the door.
Dull, discoloured or chip‐
ped tableware.
Refer to "Before first use", "Daily use", or
"Hints and tips" for other possible causes.
26 ENGLISH
Possible cause and solution
• The released quantity of rinse aid is too high. Adjust the dosage to a lower level.
• The quantity of detergent is too high.
• The released quantity of rinse aid is not sufficient. Adjust the dosage to a higher
level.
• The quality of the rinse aid can be the cause.
• This is not a defect of the appliance. Humidity condensates on the appliance
walls.
• Use the detergent designed specifically for dishwashers.
• Use a detergent from a different manufacturer.
• Do not pre-rinse dishes under running water.
• There is too much salt in the water used for washing. Refer to "The water soften‐
er".
• Silver and stainless steel cutlery were placed together. Do not place silver and
stainless steel items close together.
• The detergent tablet was stuck in the dispenser and was not washed away by
water.
• Water cannot wash away the detergent from the dispenser. Make sure that the
spray arms are not blocked or clogged.
• Make sure that items in the baskets do not impede the lid of the detergent dis‐
penser from opening.
• Refer to the "Care and cleaning" chapter.
• Start the programme Machine Care with a descaler or a cleaning product de‐
signed for dishwashers.
• The level of salt is low, check the refill indicator.
• The cap of the salt container is loose.
• Your tap water is hard. Refer to "The water softener".
• Use salt and set regeneration of the water softener even when multi-functional
tablets are used. Refer to "The water softener".
• Start the programme Machine Care with a descaler designed for dishwashers.
• If limescale deposits persist, clean the appliance with the suitable detergents.
• Try a different detergent.
• Contact the detergent manufacturer.
• Make sure that only dishwasher-safe items are washed in the appliance.
• Load and unload the basket carefully. Refer to the basket loading leaflet.
• Place delicate items in the upper basket.
• Activate the option GlassCare to ensure special care for glassware and delicate
items.