Electrolux EES47311L Notice D'utilisation page 11

Information for test institutes
To receive the necessary information for
conducting performance tests (e.g. according
to: EN60436 ), send an email to:
info.test@dishwasher-production.com
7. BASIC SETTINGS
You can configure the appliance by changing basic settings according to your needs.
Number Setting
1 Water hardness
2 Rinse aid level
3 End sound
4 Auto door open
5 Key tones
6 Latest programme
selection
1)
For more details, refer to the information provided in this chapter.
You can change the basic settings in setting
mode.
When the appliance is in setting mode, the
bars of the ECOMETER represent available
settings. For each setting, a dedicated bar of
the ECOMETER flashes.
The order of the basic settings presented in
the table is also the order of the settings on
the ECOMETER:
1 2 3 4 5 6
In your request, include the product number
code (PNC) from the rating plate.
For any other questions regarding your
dishwasher, refer to the service book
provided with your appliance.
Values
Description 1)
1L - 10L (default: Adjust the level of the water softener according to the
5L) water hardness in your area.
0A - 6A (default: 4A) Adjust the level of the rinse aid according to the nec‐
essary dosage.
On Activate or deactivate the acoustic signal for the end
Off (default) of a programme.
On (default) Activate or deactivate the AirDry.
Off
On (default) Activate or deactivate the sound of the buttons when
Off pressed.
On Enable or disable the automatic selection of the most
Off (default) recently used programme and options.
7.1 Setting mode
How to navigate in setting mode
You can navigate in setting mode using
MY TIME selection bar.
A. Previous button
B. OK button
C. Next button
Use Previous and Next to switch between
the basic settings and to change their value.
A B C
ENGLISH 11