Publicité
AUTO LOOP
The Dicer can trigger Auto Loops within Scratch Live. This
allows you to turn on a loop, leave the loop active for as
long as you wish, and then stop looping.
Each of the 5 dice buttons triggers a different auto loop
length:
1 = 1 Beat; 2 = 2 Beats; 3 = 4 Beats;
4 = 8 Beats; 5 = 16 Beats
1.
Press the AUTO LOOP mode button –– it lights in
yellow
All 5 dice buttons light (half lit) to indicate that they may be
triggered.
NOTE: Loop Rolling requires a track to have a valid BPM
value stored in the ID3 tag. If the loaded track does not
have a BPM calculated, Loop Rolling will not be possible
and the dice buttons will be unlit. Consult your Scratch Live
owner’'s manual to learn more about analyzing files and
BPM calculation
2.
Press a dice button –– e.g. button 2 –– the button lights
The track loops repeatedly for the chosen loop length –– in our example, 2 Beats.
3.
Press button 2 again to stop looping
Playback resumes from the end of the auto loop. You can change to a different auto loop length by pressing a
different dice button.
USER MODES 1 AND 2
The shift layer of LOOP ROLL and AUTO LOOP modes are reserved for user customisable MIDI functions.
With a pair of Dicers, up to 20 functions (10 per Dicer) may be mapped using the MIDI learn facility within
Scratch Live. Functions can be assigned and triggered within Scratch Live as follows
1.
Press the MIDI assign button in Scratch Live software to enter MIDI assign mode
2.
Click on the button in Scratch Live software you want to map to the Dicer
3.
While holding down the mode button, press a numbered dice button to assign the function
4.
Press the MIDI assign button in Scratch Live software to exit MIDI assign mode
5.
While holding down the mode button, press a numbered dice button to perform the function
Visit http://www.novationmusic.com for additional customised MIDI mappings for Scratch Live and other digital
DJ software
Please visit the Serato website at http://www.serato.com for more details on how to map the user functions
using MIDI learn in Scratch Live.
Scratch Live requires compatible Rane hardware to operate.
Scratch Live is a trademark of Serato Audio Research Ltd
Novation is a registered trade mark of Focusrite Audio Engineering Limited
Dicer is a trade mark of Focusrite Audio Engineering Limited
2010 © Focusrite Audio Engineering Limited. All rights reserved
DICER Getting Started Guide V1.0
All manuals and user guides at all-guides.com
Page 7
Publicité
