Publicité
BASIC OPERATION
Mode Buttons
Hot Cue
Loop Roll
Store/Trigger
1/16 beat
Cue point 1
Store/Trigger
1/8 beat
Cue point 2
Store/Trigger
1/4 beat
Cue point 3
Store/Trigger
1/2 beat
Cue point 4
Store/Trigger
1 beat
Cue point 5
Each Dicer has 5 large “"dice”" buttons which perform various actions and 3 small “"mode”" buttons which select
the mode. The active mode applies to all 5 dice buttons, and the modes are colour coded.
1.
Press any mode button to select the mode
The mode button and a number of the dice buttons will light in the same colour; an unlit dice button indicates
that there is no function active on that button (see next section).
2.
Press one of the numbered dice buttons
Depending on the selected mode, the button press will either trigger a cue point or activate a loop.
3.
Either press another dice button to perform another action in the same mode, or a different mode
button to select a different mode
In addition to the standard modes, each mode button also has a shift layer providing additional functionality.
While the shift layer is active, the 5 dice buttons perform an alternate set of functions.
NOTE: Shift layers are non-latching. In other words, the shift layer functions are only made available by
pressing and holding a mode button before triggering a dice button.
DICER Getting Started Guide V1.0
All manuals and user guides at all-guides.com
Press Dice button
whilst holding
down Mode button
Auto Loop
1 beat
2 beat
4 beat
8 beat
16 beat
Mode Buttons
Clear Cue
User Mode 1
Delete Cue Point 1
User Defined
Delete Cue Point 2
User Defined
Delete Cue point 3
User Defined
Delete Cue point 4
User Defined
Delete Cue point 5
User Defined
User Mode 2
User Defined
User Defined
User Defined
User Defined
User Defined
Page 5
Publicité
