Operation; Lifting; Lowering; Shifting/Tilting - Ravaglioli Master Gear 1,0 Mode D'emploi

54
Operating Instruction

Operation

4 Operation
Footpedal
Lowering-pedal
Fig. 9:
Danger
•Fold foot pedal away when not in use.
•Wear safety shoes with none slip sole.
•No personnel should be within the dan-
ger zone when raising or lowering the
table.
•Observe the picture symbols on the lifting
machine.

4.1 Lifting

Stand in front of the machine
Hold the handle firmly
Apply the wheel brakes
Fold down the foot pedal
Pump the pedal repeatedly downwards
until the required height is achieved
You should not travel with the machine
when it is loaded

4.2 Lowering

Stand in front of the machine
Hold the handle firmly
The wheel brakes are already applied
Hold the lowering pedal carefully down
Don`t hold the lowering pedal fully down when
the table is loaded other-wise the load
will lower too quickly.

4.3 Shifting/Tilting

Place yourself in front of the equipment.
Raise
The locking devices of the wheels are
Lower still on.
To shift or tilt the platform place a span-
ner upon the top of the relevant spindle
or at the side of the frame.
Now turn the spindle according to the
symbols affixed to move the platform
into the position desired.
Make sure to note the load every time
you shift the platform to prevent un-
wanted and dangerous changes in po-
sition in time.
127640 02/2019