127640 02/2019
Operating Instruction
Taking out of use
5
Taking out of use
Machine
for:
with
•
maintenance
•
cleaning
•
inspection
•
repair
•
battery charging
footpump •
remove load
•
set table onto it's
lowest po-sition
•
remove table-
board
6
Inspection
6.1 Inspection before the first use
for:
end of work
The machine is tested by the manu-
facturer before delivery
Machines that are delivered not ready
for use should be inspected by a quali-
fied person in the following aspects ;
lower ma-
chine
•
correct construction
•
correctness for use
6.2 Regular testing
Regular testing of machines at inter-vals
of at the longest one year should be
carried out by a qualified person.
•
use the check list on the following page
•
make a photo copy of the list
•
note top right on the check list
•
Lfd N° (check list number)
•
machine type
•
serial number
•
cross each point when it is in order
•
put the machine back into use only
when each point has been crossed
when completed put the check list into the
appendix of these operating instructions
55