Publicité
Automatic Heat Up
11
10
9
8
7
6
5
4
3
2
1
0
1
2
3
You can get the necessary heat setting in a shorter
time if you activate the Automatic Heat Up function.
This function sets the highest heat setting for some
time (see the graphic), and then decreases to the nec-
essary heat setting.
To start the Automatic Heat Up function:
1.
Touch
.
comes on in the display.
2.
Touch
again and again until
the display.
3.
Immediately touch
necessary heat setting comes on. After 3 seconds
comes on in the display.
To stop the function touch
Power function
The Power function makes more power available to the
induction cooking zones. The Power function is activa-
ted for 10 minutes at most. After, that the induction
cooking zone automatically sets back to highest heat
setting. To activate, touch
tivate, touch
or
.
All manuals and user guides at all-guides.com
4
5
6
7
8
comes on in
again and again until the
.
,
comes on. To deac-
Power management
The power management divides the power between
two cooking zones in a pair (see the illustration). The
power function increases the power to the maximum
level for one cooking zone in the pair. Automatically de-
creases the power in the second cooking zone to a low-
er level. The display for the reduced zone change be-
9
tween two levels.
Timer
Use the Count Down Timer to set how long the cooking
zone operates for only this one time.
Set the Timer after the selection of the cooking
zone.
You can set the heat setting before or after you set the
timer.
• To set the cooking zone:touch
until the indicator of a necessary cooking zone
comes on.
• To activate or change the Timer: touch
of the timer to set the time (
When the indicator of the cooking zone starts to
flash slow, the time counts down.
• To deactivate the Timer: set the cooking zone with
and touch
maining time counts back to
the cooking zone goes out.
• To see the remaining time: set the cooking zone
with
. The indicator of the cooking zone starts to
flash quickly. The display shows the remaining time.
When the time comes to an end, the sound operates
00
and
flashes. The cooking zone deactivates.
• To stop the sound: touch
You can use the Timer as a minute minder while the
cooking zones do not operate. Touch
to set the time. When the time comes to an end, the
sound operates and
• To stop the sound: touch
again and again
00
99
-
minutes).
to deactivate the Timer. The re-
00
. The indicator of
. Touch
00
flashes
or
or
19
Publicité
