Publicité
Instruction CF-RC Remote Controller
5. Menus
Note: When the back light in the display is out, the rst touch of a button
only activates this light.
5.1 Rooms
From the start-up screen, activate the:
Rooms menu to access a list of all the rooms in the system. Select the
desired room with OK to enter the screen for that room. Here you can
see information about the set and actual temperatures:
: Indicates that this room is included in an ongoing time pro-
gram (see 5.2)
: Indicates that the Room Thermostat is running low on battery
: Indicates that the value set on the Room Thermostat is beyond
!
the max./min. limitations set by the Remote Controller
: Indicates that the set temperature is above the actual tem-
perature
: Indicates that the set temperature is below the actual tem-
perature
VI.UH.M2.52
Menu
Rooms
Produced by Danfoss Floor Heating Hydronics 09.2005
9
Publicité
