Publicité
Instruction CF-RC Remote Controller
Use the up/down and left/right selectors ( g. 1-
/ ) to select the
days for this program by moving them above the horizontal line.
Con rm with OK, and activate the next step to select the time for the
setback program.
Select the time for the setback program by setting the times for the
periods during which you want a normal room temperature, indicated
by the black bars
above the time line (the periods outside the black
bars are the setback periods with reduced room temperature). Set the
start and end times by means of the left/right selector and by toggling
between them using the up/down selector ( g. 1-
/ ).
You can remove the
second period with the
normal room tempera-
ture
by changing the
end time of this period
to its start time:
The second period
with the normal room
temperature
can be
added again by means
of the up/down selector
and by toggling through
the rst period
.
14
VI.UH.M2.52
Produced by Danfoss Floor Heating Hydronics 09.2005
Publicité
