Publicité
Introduction
List of pictograms used
Please read the operating
instructions!
Wear hearing protection,
respirator / dust mask, gog-
gles, and protective gloves.
Compressed air hose
Dispose of the packaging and
product in an environmental-
ly-friendly manner!
AIR ANGLE GRINDER
PDTS 6.3 A1
zz Introduction
Congratulations! You have purchased
a high-quality product. Before initial
startup, please familiarise yourself
with the product. First read the safety instructions
carefully. Only trained persons may start up this
product.
KEEP OUT OF THE REACH OF CHILDREN!
z Intended use
z
The pneumatic angle grinder is a tool powered
by compressed air for skilled manual work. It is
designed for easy parting work on metal. The
operating personnel should wear goggles to protect
themselves from flying fragments and accidental
contact with the abrasive wheel. Caution! This
device may be used only as specified herein.
6
GB/IE/NI
292193 Druckluft-Trennschleifer_content_LB6.indb 6
Note
Observe warnings and the
safety instructions!
Never use bottled hydrogen,
oxygen, carbon dioxide, or
other gases as an energy source
Oil regularly!
z Features
z
1
Compressed air connection
2
Trigger arm
3
Switch ON guard
4
Housing
5
Protective cowl
6
Parting disc
7
Assembly key
8
Allen key
9
Screw plug
z Technical specifications
z
Product:
Pneumatic angle grinder
Model:
PDTS 6.3 A1
Operating pressure:
6.3 bar
Compressed air
connection
1/4" (6.35 mm)
Idle speed:
19,000 rpm
Parting disc:
Ø 75 × 2.0 x Ø 9.5 mm
Spindle diameter:
9.5 mm
Length:
185 mm
Weight:
0.7 kg
Noise emission values
(under EN ISO 15744): L
WA
L
: 91.6 dB
PA
Uncertainty K:
3 dB
: 102.6 dB
01.12.17 09:56
Publicité
