Publicité
Only use 230 V∼ LED bulbs with a G9 base
and a maximum output of 5 W.
CAUTION! Risk of burn injuries! To
prevent burns, verify the product is switched off
and has cooled down for at least 15 minutes
before touching it. The product can become
very hot.
˜ Before use
Note: Remove all packaging materials from
the product.
Screw and connect Upper tube
tube
and Bottom tube
9 ]
[
Then rotate it to floor lamp base
Insert the provided G9 bulb
holder
. Check again if it is proper installed.
7 ]
[
Rotate and install the inner shade
clockwise.
Place glass shade
[
3 ]
inner shade
, fix it by lock dot
5 ]
[
Insert the mains plug
domestic mains outlet socket (230 V∼).
Use the ON/OFF foot switch
product on or off.
Note: Let the product cool down before you
touch it.
˜ Replacing the bulb
Please refer to full manual.
˜ Maintenance and cleaning
Allow the product to cool down completely.
Pull the mains plug
Do not use solvents, benzene or similar
substances. They could damage the product.
m
WARNING! DANGER TO LIFE BY
ELECTRIC SHOCK! Before carrying out any
tasks on the product, switch off the electrical
circuit at the circuit breaker box or remove the
fuse from the fuse box.
m
WARNING! RISK OF ELECTRIC SHOCK!
For electrical safety, never clean the product
with water or other liquids, or immerse it in
water.
Only use a dry, lint-free cloth for cleaning.
14 GB/IE
and Lower
[
8 ]
.
10 ]
[
.
[
11 ]
into lamp
6 ]
[
by
[
5 ]
and top plate
on the
2 ]
[
.
1 ]
[
into an ordinary
[
14 ]
to switch the
[
13 ]
out of the mains socket.
[
14 ]
After finished the maintenance and cleaning,
screw the fuse on and / or switch the circuit
breaker on again.
˜ Disposal
The packaging is made of environmentally friendly
materials, which may be disposed of through your
local recycling facilities.
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics/20–22: paper and
fibreboard/80–98: composite materials.
Product:
The product incl. accessories, manual and
packaging materials are recyclable and are subject
to extended producer responsibility.
Dispose them separately, following the illustrated
Info-tri (sorting information), for better waste
treatment.
The Triman logo is valid in France only.
Contact your local refuse disposal
authority for more details of how to
dispose of your wornout product.
To help protect the environment, please
dispose of the product properly when it
has reached the end of its useful life and
not in the household waste. Information
on collection points and their opening
hours can be obtained from your local
authority.
Publicité
