Publicité
TROUBLESHOOTING
What happened
Camera will
not operate
Film does not
advance or rewind
LCD panel is blank
LCD panel displays:
"BATTERY LOW"
"REPLACE BATTERY"
"FLASH NOT READY"
Flash/camera ready
lamp "blinks" red
Flash/camera ready
lamp glows red
All manuals and user guides at all-guides.com
Probable cause
There are no more
pictures remaining
Battery weak, dead, missing,
or improperly loaded
Battery weak, dead, missing,
or improperly loaded
Battery weak, dead, missing,
or improperly loaded
Camera in sleep mode
Battery weak
Battery weak, dead, missing,
or improperly loaded
Flash not fully charged
Flash not
fully charged
Subject closer
than 2.0 ft (0.6 m)
Solution
Remove the film and replace
with new film
Replace or reload
the battery
Replace or reload
the battery
Replace or reload
the battery
Press almost any of the
control buttons to awaken
the camera
Replace the battery
Replace or reload
the battery
Wait until the "FLASH
NOT READY" message
disappears or until the
flash-ready lamp glows green
Wait for lamp to
glow green
See Flash-to-subject
distance on page 17
31
Publicité
