Publicité
Saw blade
Outer
flange
Screw
6. Use the Allen key to loosen the screw
counter-clockwise. Remove the outer
flange and the saw blade.
7. Clean both flanges and replace the saw
blade.
Note: The rotation direction arrows of saw
blade and saw must be aligned!
8. Replace the outer flange in such way that
30
7061274 Ma # 1406-17.indd 30
All manuals and user guides at all-guides.com
9. Press and hold the shaft lock and tighten
Inner flange
GUIDE RAIL(S) AND CLAMPS
(OPTIONAL)
The guide rails allow precise and clean
straight cuts, miter cuts and fitting. The rails
also protect the work piece surface from
damages.
Fixing with the clamps ensures solid grip and
safe work.
1. Unlock the clamps by pressing the unlock
2. Place the guide rail on the work piece and
TM
the slaving pins sit in the recesses of the
inner flange.
the screw. Press the switch lock (1) for the
casing to swivel up again.
Unlock button
buttons. Open the clamps according to the
thickness of the work piece.
fix the guide rail with the clamps. Slide the
bar into the groove of the guide rail and
tighten the clamp with the lever.
Note: Place the guide rail with the black
Guide ridge
foam strips on the work piece.
Bar
17-06-14 13:29
Publicité
