Main Ten An Ce; Ge Ne Ral No Tes; Main Te Nance Sched Ule - Ammann APF 1033 Traduction Du Mode D'emploi Original

5. Main ten an ce

5.1 Ge ne ral no tes

Ca re ful main ten an ce:
in crea sed ser vi ce life
in crea sed functi on
re du ced downti mes
in crea sed re lia bi li ty
re du ced repair costs
•
Ob ser ve the sa fe ty re gu la tions!
•
Main te nance works should only be car ried out when the
en gine is shut off.
•
The en gine and ma chine should be cleaned thorougly be -
fore car ry ing out main te nance work.
•
Park the ma chine on a flat sur face and se cure it against
roll ing away and slip ping.
•
En sure that op er at ing ma te ri als and re placed parts are
dis posed of safely and in an en vi ron men tally – friendly
way.

5.2 Main te nance sched ule

Works
Clean ma chine
1)
Check en gine oil level
1)
Change en gine oil
1)
Check air fil ter
1)
Clean air fil ter
1) 2)
Change air fil ter el e ment
1)
Check/clean spark plug
1) 2)
Change spark plug
Check, adj. the valve clear ance
Ex citer: Check oil level
2)
Ex citer: Change oil
Check rub ber buffer
Check V-belt
Retightened screw con nec tions
1)
Ob serve the en gine man ual
2)
or an nu ally
3)
first time
In ter vals
dai ly
1)
•
Be fore com menc ing work on any elec tri cal equip ment,
dis con nect the bat tery and cover it with in su lat ing ma te -
ri als.
•
Do not ex change «PLUS» and «MINUS» poles on the bat -
tery.
•
It is es sen tial that short-cir cuits be pre vented in ca bles
car ry ing cur rent.
•
Be fore weld ing works on the ma chine put-off all con nec -
tions and bat tery ca bles.
•
Burn-out lightbulbs in in di ca tor lamps should be re -
placed im me di ately.
•
When clean ing the ma chine with a high-pres sure wa ter
jet, do not spray the elec tri cal com po nents di rectly.
•
Af ter was hing the com po nents, blow-dry them with com -
pres sed air in or der to pre vent sur fa ce lea ka ge cur rent
and cor ro si on.
20 h 50 h
3)
3)
3)
28
100 h 200 h
3)
as
re qui red