Publicité
11.2.7. Information
Function enables displaying additional information in the bottom line. Depending on the needs, you
can choose the following options, which are shown while working in <WEIGHING> mode:
<BARGRAF> option presents amount of used weighing capacity in a graphic form, it covers 0 – MAX
range.
Example of a PS 1000.R2 balance display with bargraph option on: 500 g heavy load placed on a
weighing pan means that 50% of max capacity has been used (half-filled bargraph bottom line).
It is possible to enable <BARGRAF> option for the following modes: PARTS COUNTING, DOSING,
PERCENT WEIGHING, WEIGHING, ANIMAL WEIGHING, STATISTICS, TOTALIZING, PEAK
HOLD.
11.2.8. Non-Standard Information
Function enables declaring non-standard information, which is to be displayed in the bottom line of
the display. You can insert any text consisting of 19 characters maximum.
- 47 -
Publicité
