Publicité
Enjoying through External Equipment
Using HDMI Input
The INPUT 3 terminals include HDMI terminals to which
digital video and audio signals can be input. To use the HDMI
terminal, activate the terminal and specify the types of video
and audio signals to be received from the connected equip-
ment. For the types of these signals, see the operation
manual that came with the connected equipment.
Before starting the menu, press INPUT 3 on the remote
control unit or press INPUT on the Plasma Display to select
INPUT 3.
Input signal correlation table
∗
1920
1080i@50Hz
∗
720
576p@50Hz
∗
1280
720p@50Hz
∗
720(1440)
576i@50Hz
∗
1920
1080i@59.94/60Hz
∗
720
480p@59.94/60Hz
∗
1280
720p@59.94/60Hz
∗
720(1440)
480i@59.94/60Hz
• PC signals are out of correspondence.
Connecting HDMI equipment
Media Receiver (rear view)
OUT
I N
SERVICE ONLY
CONTROL
INPUT 1
i / o link.A
SELECT
INPUT
2
3
INPUT 2
SCART cable
(commercially available.)
Connect the SCART cable only
when inputting analogue audio
signals.
HDMI equipment
To activate the HDMI terminal:
1
Press HOME MENU.
2
Select "Option" ( /
3
Select "HDMI Input" ( /
4
Select "Setting" ( /
5
Select "Enable" ( /
Item
Disable
(factory default)
Enable
6
Press HOME MENU to exit the menu.
PDP-505XDE-Eng (44-47)
All manuals and user guides at all-guides.com
ANT
DIGITAL OUT
(DIGITAL)
OPTICAL
OUT
IN
COMMON INTERFACE
SUB WOOFER
INPUT 2
OUTPUT
COMPONENT VIDEO
Y
P
B
P
R
MONITOR
OUTPUT
HDMI
VIDEO
R-AUDIO-L
INPUT 3
INPUT 3
S- VIDEO
HDMI cable
(commercially
available.)
then ENTER).
then ENTER).
then ENTER).
then ENTER).
Description
Deactivates the HDMI terminal.
Activates the HDMI terminal.
45
To specify the type of digital video signals:
1
Repeat steps 1 to 3 provided To activate the HDMI
terminal.
2
Select "Video" ( /
then ENTER).
3
Select the type of digital video signals ( /
ENTER).
• If you select "Auto", an attempt will be made to
identify the type of digital video signals when digital
video signals are received.
Item
Description
Auto
Automatically identifies input digital video
(factory default) signals.
Colour-1
Digital Component Video signals (4:2:2)
locked
Colour-2
Digital Component Video signals (4:4:4)
locked
Colour-3
Digital RGB signals locked
4
Press HOME MENU to exit the menu.
• If you select a parameter other than "Auto", make such a
setting that results in natural colour.
• If no image appears, specify another digital video signal
type.
• For the digital video signal types to be specified, check the
operation manual that came with the connected equip-
ment.
To specify the type of audio signals:
1
Repeat steps 1 to 3 provided To activate the HDMI
terminal.
2
Select "Audio" ( /
then ENTER).
3
Select the type of audio signals ( /
• If you select "Auto", an attempt will be made to
identify the type of audio signals when audio signals
are received.
Item
Description
Auto
Automatically identifies input audio
(factory default) signals.
Digital
Accepts digital audio signals.
Analogue
Accepts analogue audio signals.
4
Press HOME MENU to exit the menu.
• If no sound is output, specify another audio signal type.
• For the audio signal types to be specified, check the
operation manual that came with the connected equip-
ment.
• Depending on the equipment to be connected, you also
need to connect analogue audio cables.
04.6.15, 1:14 PM
12
then
then ENTER).
45
En
Publicité
