Publicité
Watching TV
Using the multiscreen functions
Splitting the screen
Use the following procedure to select the 2-screen or picture-
in-picture mode.
2-screen
Picture-in-picture
1
c
c
Press c
c
c to select the display mode.
• Each time you press c
among 2-screen, picture-in-picture, and single-screen.
• In 2-screen or picture-in-picture mode, press
switch the position of the 2 screens shown.
The left screen is the active screen which will be
indicated by "z". The user is allowed to operate
picture and sound.
• In 2-screen mode, press f to change the size of the
left screen.
PDP-505XDE-Eng (21-26)
All manuals and user guides at all-guides.com
c , the display mode is switched
c
c
c
25
• In picture-in-picture mode, press
position of the small screen anti-clockwise.
2
To select the desired input source, press the appropriate
input source button.
• If watching TV programmes, press P+/P– to change
the channel.
• The multiscreen function cannot display images from the
same input source at the same time. If you make such an
attempt, a warning message appears.
• When you press HOME MENU the single-screen mode is
restored and the corresponding menu is displayed.
• When in the 2-screen mode, images displayed on the right
screen may look less fine, depending on the images.
• While in the 2-screen mode, the analogue favourite channel
list is not available.
• While in the 2-screen mode, the digital channel list is not
available. (PDP-505XDE/435XDE only)
to
04.6.15, 1:04 PM
07
to move the
25
En
Publicité
