Publicité
ENG
DE
FR
RoomPerfect™ guide
This will start the guided RoomPerfect™ setup and will erase previously
stored calibrations. When completed, the following menu items are
available in the RoomPerfect™ setup menu.
The RoomKnowledge index is an estimate of how much of the room's
acoustical properties have been learned from the room measurements. The
higher the RoomKnowledge index, the greater the accuracy of the
calibration.
Handle focus positions
If you would like to add an additional focus position, the chair next to the
couch perhaps, it can be done here. It is possible to have up to eight
different focus positions.
The saved calibration volume from the RoomPerfect™ guided setup is
used as a default when adding extra focus positions. The volume can be
changed at any time between measurements to suit a situation. This will
not affect the quality of the measurement or the result.
Add room measurement
It is possible to add more room measurements, which can increase
RoomKnowledge and thereby fine tune all the room correction filters.
Placing the microphone in the focus position
When you are prompted to place the microphone in the focus position,
connect the microphone to the microphone input on the back panel using
the provided microphone cable and place the microphone, using the
32
Hot Tip: The objective is to have the RoomKnowledge
index increase as slowly as possible. This indicates that
each measurement holds new data for the calibration.
When the measurement does not give new data, the
index will increase quickly.
Lyngdorf Audio TDAI-1120 – Owner's manual
Publicité
