Publicité
ENG
DE
FR
Refer to the original manufacturer's instructions to obtain the correct
amplifier delay in milli-seconds and enter this data. The TDAI-1120 will
delay the signal to the speakers to match the delay entered.
Main speaker output:
The available settings are:
•
Crossover
•
Full range allows the signal to pass unfiltered.
Analog output:
The available settings for routing are:
•
Crossover
•
Full range allows the signal to pass unfiltered to a separate
amplifier, bypassing the internal amplifier.
•
Headphone disables RoomPerfect™; voicings are still available.
Muting the TDAI-1120 will only mute the speakers, not this output.
•
Tape Out disables RoomPerfect™, voicings and volume control.
•
Off mutes the output.
Level adjusts the output to align the level of the subwoofer(s) to the level of
your main speakers. Making the output adjustment here is far better than
attenuating the level on the subwoofer itself.
Low or High pass crossover filters:
If a filter is selected, the frequencies below or above the selected crossover
frequency will be directed through the designated output terminals.
The available types of crossover filters are named after the inventors of
these filter designs:
•
LR: (Linkwitz Riley) 2nd, 4th or 8th order.
•
BW: (Butterworth) 1st, 2nd or 4th order.
30
High pass removes the frequencies below the crossover
o
frequency.
Low pass removes the frequencies above the crossover
o
frequency.
High pass removes the frequencies below the crossover
o
frequency.
Low pass removes the frequencies above the crossover
o
frequency.
Lyngdorf Audio TDAI-1120 – Owner's manual
Publicité
