Publicité
When connecting to a Lyngdorf BW type subwoofer, you connect the
analog output of the TDAI-1120 to the Bypass input of the subwoofer. In a
traditional single subwoofer setup, connect the subwoofer to the left analog
output on the TDAI-1120. For a stereo subwoofer setup, or if you have a
subwoofer which has stereo input, use both left and right analog outputs.
Warning!: Do not connect the TDAI-1120 to a
subwoofer with High Level / speaker terminal inputs, as
this will seriously damage the amplifier. Your
subwoofers will not play until the setup has been
A N A L O G
O U T P U T
IN P U T
L
R
A 2
A 1
Subwoofer controls (not Lyngdorf type):
1. Phase adjustment should be 0°.
2. The subwoofer cut-off frequency should be set to the highest
possible frequency range.
3. Level should be set to 50% of the maximum.
Lyngdorf Audio TDAI-1120 – Owner's manual
finalized.
Designed and manufactured in
ANALOG AUDIO MODULE
HDMI MODULE
RIGHT
LEFT
Denmark by SL Audio A/S
INPUT
OUTPUT
www.lyngdorf.com
L
Warning. To reduce the risk of fire
Audio Equipment
HDMI 1
HDMI 3
or electric shock, do not expose
this apparatus to rain or moisture
3YZ9
R
Avertissement: Pour réduire le
risque d'incendie et de décharge
électrique l'appareil ne doit pas
A3
A4
A5
A6 RIGHT
A6 LEFT
être exposé à l'eau ou à l'humidité
HDMI 2
HDMI 4
OUT
CLASS 2 WIRING
TRIGGER
100-240 V ~ 50/60Hz 80W
ANALOG
DIGITAL
IN
INPUT
OUTPUT
D1
INPUT
OUTPUT
USB MODULE
L
USB AUDIO IN
R
A1
A2
MICROPHONE
D2
D3
D4
D5
D6
SW
RS232
TRIGGER
TDAI 2170
UPDATE
OUT
ENG
Phase
Cut-off
Level
0
180
40
200
0
100
15
DE
FR
Publicité
