Publicité
ENG
DE
FR
Turning on the TDAI-1120 for the first time
When you connect the TDAI-1120 to mains power, the Lyngdorf logo on the
front will blink through-out the start-up process. When the logo stops
blinking, push the Standby button and the TDAI-1120 is ready for operation.
Network connection by cable (recommended)
If the TDAI-1120 is connected to your network by cable, you can now
access the TDAI-1120 by the Lyngdorf Remote Application for IOS and
Android™ devices, and you can stream to the TDAI-1120 from your music
applications. (See page 13, Lyngdorf Remote application.)
Establishing Wi-Fi connection
The TDAI-1120 can be connected to your Wi-Fi network through an
iPhone/iPad functionality, an Android functionality or by using the manual
WPS functionality on routers.
Holding
SOURCE/MUTE button
for 0-5 sec
Wi-Fi icon: on
Function: Reset
Wi-Fi procedure with iPhone or iPad (active immediately upon turning
on)
1. Press and hold the "Source/Mute" button for five seconds.
2. The Wi-Fi symbol will be flashing slowly, and the TDAI-1120 now
appears on all your devices in the Wi-Fi section (under "Set new
Airplay speaker") under Settings.
3. Select the Airplay speaker and settings will be transferred from
your smartphone/tablet to your TDAI-1120.
Wi-Fi procedure with Android
1. Open your Google Home App and press the add sign in the top left
corner on the front page to start adding the TDAI-1120 to your
"Google home" environment.
16
Holding SOURCE/MUTE button for 10-15 sec
Wi-Fi icon: flashing quickly
Function: WPS select
Lyngdorf Audio TDAI-1120 – Owner's manual
Holding SOURCE/MUTE
button for 5-10 sec
Wi-Fi icon: flashing slowly
Function: smartphone/tablet
procedure
Publicité
