Publicité
ENG
DE
FR
3. Press the WPS button on your Wi-Fi router, and the TDAI-1120 will
start connecting.
4. When the Wi-Fi icon stops flashing, the TDAI-1120 is connected.
Factory reset
If you press and hold the Standby button for more than five seconds all the
icons will be showing and then you should release the button. The TDAI-
1120 will initiate a factory reset. The factory reset will clear all your previous
settings, Wi-Fi settings, saved playlists etc.
If you have pressed the Standby button for more than five seconds by
mistake, you can avoid the factory reset by holding the Standby button for
an additional five seconds. This will skip the factory reset initiation.
18
Lyngdorf Audio TDAI-1120 – Owner's manual
Publicité
