GYS POWERDUCTION 50LG Manuel D'utilisation page 20

Translation of the original instructions
This equipment complies with the IEC 61000-3-11.
Maintenance:
• If the power cable is damaged, it must be replaced by the manu-
• Warning! Always disconnect from the mains before performing
• If the internal fuse is melted, it must be replaced by the manufac-
• Remove the casing on a regular basis, to remove any excess dust.
• Do not use solvents or any agressive cleaning products.
• Clean the device's surfaces with a dry cloth.
Regulations:
Device complies with europeans directives.
The certificate of compliance is available on our website.
EAEC Conformity marking (Eurasian Economic Community).
Waste management:
This product should be disposed of at an appropriate recycling fa-
cility. Do not throw away in a domestic bin.
Ecopackaging symbol
«The product's manufacturer contributes to the recycling of its pac-
kaging by contributing to a global recycling system».
TRIMAN symbol
«This product should be recycled appropriately».
20
All manuals and user guides at all-guides.com
POWERDUCTION 50LG
facturer, its after sales service or an equally qualified person to
prevent danger.
maintenance on the device.
High Voltage and Currents inside the machine.
turer (GYS' dedicated sales service) or by an equally qualified
person to prevent any accidents.
Take this opportunity to have the electrical connections checked
by a qualified person, with an insulated tool.
EN