Control Options - Jenn-Air ProStyle JDS9860AAP Guide De L'utilisateur

Cuisinièrè mixte encastrable à évacuation descendante
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

O
C
VEN
OOKING
C
T
/S
T
OOK
IME
TOP
Use to program the oven to start and stop
automatically.
1. Press Bake, Convect Bake, or Con-
vect Roast pad. Press the appropriate
number pads for desired temperature.
2. Press Cook Time pad. Press the ap-
propriate number pads to enter cooking
time in hours and minutes.
3. To delay the start of cooking, press
Stop Time pad. Press the appropriate
number pads to enter the time you want
the oven to stop.
See page 14-15 for additional information.
D
RYING
Use to dry or dehydrate foods such as fruits,
vegetables and herbs.
1. Press Drying pad.
2. Press Preset (0) pad for 140°F or the
appropriate number pads for the drying
temperature desired.
See page 15-16 for additional information.
S
C
ETTING THE
LOCK
1. Press Clock pad.
• The indicator word TIME will flash in
the display.
2. Press the appropriate number pads until
the correct time of day appears in the
display.
When electrical power is supplied or after
a power interruption, the last clock time,
before power was interrupted, will flash.
To recall the time of day when another time
function is showing, press the Clock pad.
Clock time cannot be changed when the
oven has been programmed for clock con-
trolled cooking, self-clean or delayed self-
clean.
,
.
CONT
S
ETTING THE
IME
Use to set and then signal the completion
of a time period up to 99 hours and 59
minutes.
The timer can be used independently of any
other oven activity and can be set while
another oven function is operating. The
timer does not control the oven.
1. Press Timer pad.
• The indicator word TIMER will flash
and "0Hr:00" appears in the display.
2. Press the appropriate number pads until
the desired number of minutes or hours
and minutes appear in the display.
Example: To set the Timer for 5
minutes, press the Timer pad and the
number 5 pad. The control will begin
countdown after a four second delay.
0 :05
DELAY COOK STOP
Example: To set the Timer for 1 hour
and 30 minutes, press the Timer pad
and the numbers 1,3,0 pads. The con-
trol will begin countdown after a four
second delay.
1 :30
DELAY COOK STOP
3. The last minute of the countdown will
be displayed as seconds.
4. At the end of the time set, the timer will
beep and "End" will appear in the dis-
play. To change the number of timer
beeps and add reminder beeps, see next
column.
TO CANCEL:
1. Press and hold Timer pad for three
seconds. The time of day will reappear.
OR
T
IMER
HR
BAKE
LOCK
TIMER
CLEAN ROAST BROIL
HR
BAKE
LOCK
TIMER
CLEAN ROAST BROIL
11
2. Press the Timer pad and the "0" num-
ber pad. After a slight delay the time of
day will reappear.
NOTE: Pressing Stop/Clear pad to cancel
the timer will cancel ALL selected oven func-
tions except the clock and timer.
C
O
ONTROL
PTIONS
C
L
ONTROL
OCKOUT
The control touchpads can be locked to
prevent unwanted use. They will not func-
tion when locked.
If an oven function is currently being used,
the controls cannot be locked.
The current time of day will remain in the
display when this feature is activated.
SETTING CONTROL LOCKOUT:
1. Press and hold the Stop Time and the
Stop/Clear pads at the same time for
three seconds.
• The indicator word OFF will appear
in the display for 15 seconds. OFF
will reappear for 15 seconds if any
pad is pressed.
TO CANCEL:
Press and hold the Stop Time and the
Stop/Clear pads at the same time for
three seconds. The indicator word OFF
will disappear in the display.
T
B
O
IMER
EEP
PTIONS
• Option 1: One long beep at the end of
the timer operation, then, one short
beep every 30 seconds for the next five
minutes or until the Stop/Clear pad is
pressed.
• Option 2: One long beep at the end of
the timer operation, then, one short
beep every minute for the next 12
O
PTION

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

8113p365-60

Table des Matières