Télécharger Imprimer la page

Burcam 506532SS Instructions D'installation page 9

Masquer les pouces Voir aussi pour 506532SS:

Publicité

TROUBLE SHOOTING GUIDE CHECKLIST
NEVER MAKE ADJUSTMENTS TO ANY ELECTRICAL APPLIANCE OR
PRODUCT WITH THE POWER CONNECTED. DON'T JUST UNSCREW
THE FUSE OR TRIP THE BREAKER, REMOVE THE POWER FROM
THE RECEPTACLE.
TROUBLE
PROBABLE CAUSE
Blown fuse
Motor does
not run.
Tripped breaker
Defective motor
Pump not primed
Motor runs
Leaky suction line
but no water
is delivered.
Foot valve plugged
Venturi clogged
Water level below foot valve
Suction lift too great
Improper voltage
Water level below foot valve
Pump does
Venturi clogged
not deliver to
full capacity.
Excessive friction in pipe
Improper voltage
Leaky discharge line
Pump does
Motor not up to normal speed
not shut off.
Venturi clogged
Leaky foot valve
Pump start
stop too often.
Leaky suction line
Foot valve does not close properly
Leaky discharge line (toilet etc.)
Leaky suction line
Air spurts
from faucets.
Gaz in water
TO THE END CONSUMER
If you have any problems with the product, before advising the store, where you've
purchased the pump, please contact us at 514 337-4415, and ask for our sales
department, and they will be pleased to help you with any questions you might have,
concerning your installation.
ACTION
Replace
Reset
Replace
Prime with clean water
Check pipe and pipe connections
Clean
Clean
Check foot valve level
Water level lower than lift capacity
Check voltage
Check foot valve level
Clean
Too small or dirty pipe
Check voltage
Check all pipes for leak
Check power cable and voltage
Clean
Replace
Check pipe and pipe connections
Clean or replace
Check all pipes for leak
Check pipe and pipe connections
Check and consult factory
9

Publicité

loading