Publicité
6
Note the new flow limiter value on the
control unit sticker with a ballpoint pen.
7
Mount the solenoid valves. → See
page 107.
8
Mount the control unit and check that the
solenoid valves function correctly. → See
5
, page 108.
9
Mount the cover plate. → See
45035999171656331-1 © 06-2019
966.709.00.0(03)
All manuals and user guides at all-guides.com
Repair
Replacing the control unit
1
4
,
2
3
6
, page 109.
4
5
Replacing volumetric flow rate
sensors or solenoid valves
1
2
3
4
5
6
Before removing the control unit, read out
the flushing parameters using the Geberit
SetApp.
Demount the cover plate. → See
page 105.
Demount the control unit. → See
page 105.
Mount the new control unit (art. no.
243.069.00.1) and check that the solenoid
valves function correctly. → See
page 108.
Put the Geberit sanitary flush into operation.
→ See "Putting the Geberit sanitary flush
into operation after repair", page 24.
Mount the cover plate. → See
Demount the cover plate. → See
page 105.
Demount the control unit. → See
page 105.
Demount the solenoid valves. → See
page 106.
Mount the new volumetric flow rate sensors
(art. no. 616.207.00.1) or new solenoid
valves (art. no. 243.065.00.1). → See
page 107.
Mount the control unit and check that the
solenoid valves function correctly. → See
5
, page 108.
Mount the cover plate. → See
EN
1
,
2
,
5
,
6
, page 109.
1
,
2
,
3
,
4
,
6
, page 109.
23
Publicité
