Publicité
MACHINE COMPOSITION
06
10
07
04
The machine is composed of:
- a base (01) on which the control keyboard (02) is mounted and, at the back, the master switch;
- a surface (03) on which the resistance is mounted, attached to the 4 columns on the machine base,
onto which the lower female baking plate (04) is mounted;
- a cover (05) holding the resistance and with a heat-proof grip on the handle (06); the upper male
baking plate (07) is mounted on the cover;
- a handle (08) with heat-proof grip and with its levers hinged onto the cover handle, to be used for
closing the plates during the baking phase;
- pair of baking plates: lower (female) and upper (male) plates supplied on request (see Accessories
paragraph);
- eight 4+4 wing nuts (09) for fixing the plates, supplied with the machine;
- 2 screws and 2 spacers (10), supplied together with the machine, to be screwed onto the lower
plate (04) for hooking the plate-closure handle levers (08).
MOUNTING THE BAKING PLATES ONTO THE MACHINE
- Lift up the cover using the handle (06);
- insert the lower female plate (04) into the housing on the surface (03) fixed onto the 4 columns, taking
care to position the raiser, for removing the baking residues, towards the back of the machine;
- take the upper male plate (07) and position it on the lower plate (04), referring to the 4 protruding pins;
- close the cover (06);
- check that the two plates (04 and 07) are coupled;
- screw (do not tighten) the upper plate (07) to the cover (05) with the 4 fixture wing nuts (09);
- screw (do not tighten) the lower plate (04) to the base surface with the 4 fixture wing nuts (09);
- check couplings;
- mount 2 spacers (10) one on each side of the lower plate (04) with the 2 screws (1+1);
- hook on the plate closure handle levers (08) onto the spacers (10) and check automatic centring;
- open and close the cover (with the upper plate mounted) and check that the movement is not hindered
in any way;
- completely tighten the 4+4 wing nuts on the two plates;
- open and close the cover again to check.
All manuals and user guides at all-guides.com
08
MOUNTING PLATES – MACHINE SIDE
06
07
10
04
09
02
01
09
05
08
03
11
9
Publicité
