Publicité
Switching on/off
To start the power tool, press and hold the on/off switch
(9).
The LED (8) lights up when the on/off switch (9) is lightly or
fully pressed, meaning that the work area is illuminated in
poor lighting conditions.
To switch off the power tool, release the on/off switch (9).
LED worklight with status indicator
The LED worklight (8) is used as a status indic-
ator for device protection and low battery
status:
LED
Description
Feedback
Flashing light 3x
Battery status is low.
during operation
The voltage level of the battery has fallen
below the optimum value. The perform-
ance of the device is restricted.
Flashing light 3x
Device protection is active.
during downtime
Device protection has been activated to
prevent the battery from consuming a
large amount of power and to protect the
device against damage.
– If the battery status is low, charge the battery (6) or re-
place the weak battery with a fully charged battery.
Fully automatic spindle lock (Auto-Lock)
The drill spindle, and therefore the tool holder (1), are
locked when the on/off switch (9) is not pressed.
This enables screws to be screwed in even when the battery
(6) is empty and allows the power tool to be used as a
screwdriver.
Practical advice
Tips
Before screwing larger, longer screws into hard materials, it
is advisable to pre-drill a pilot hole with the core diameter of
the thread to approx. 2/3 of the screw length.
After working at a low speed for an extended period, you
should operate the power tool at the maximum speed for ap-
proximately three minutes without load to cool it down.
When drilling into metal, only use sharpened HSS drills
(HSS = high-speed steel) which are in perfect condition. The
Bosch accessory range guarantees appropriate quality.
Belt Hook (see figure D)
You can use the belt hook (13) to hang the power tool on a
belt, for example. You then have both hands free and the
power tool is always at hand.
Utility hook (see figure E)
You can use the utility hook (14) to attach the power tool to
a suitable suspension device.
Bosch Power Tools
Connectivity functions
System Requirements for Using the App
System Requirements
Mobile device (tablet,
smartphone)
Installing and Setting up the App
You will need to install the device-specific app before you
can use the connectivity functions.
– Download the app from the corresponding app store
(Apple App Store, Google Play Store).
Note: You will need to have a user account with the relev-
ant app store to do this.
App name
BeConnected
PRO360
– The display of your mobile device shows you all of the
subsequent steps required to connect the power tool to
the mobile device.
Functions in Conjunction with the Power Tool
In conjunction with the NFC Low Energy module, the follow-
ing connectivity functions are available for the power tool:
– Registration and personalisation
– Status check, output of warning and error messages
– General information and settings
– Management
You can find further information in the Help menu in the app.
Maintenance and Service
Maintenance and Cleaning
Before carrying out any work on the power tool (e.g.
u
maintenance, tool change etc.), remove the battery
from the power tool. There is risk of injury from uninten-
tionally pressing the on/off switch.
To ensure safe and efficient operation, always keep
u
the power tool and the ventilation slots clean.
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
English | 19
Android 6.0 (and newer)
iOS 11 (and newer)
iOS/Android
1 609 92A 93J | (05.09.2024)
Publicité
