Publicité
1. Connect the product to the LPG gas supply and ensure the connection is secure before operation.
2. Turn the button counterclockwise from the "close" position to the "★" position, then continue turning
to the bottom. Press and hold for about 20 seconds to ignite. If the product has not been used for a
long time or is being used for the first time, it may take 2-3 minutes to ignite, which is normal.
3. After the pilot flame ignites, turn the button to the "00" position to ignite the main burner. (Turn the
button to the "0" position for the smallest flame.)
4. To turn off the pilot flame, rotate the button from the "★" position to the "●" position.
5. Please close the gas supply valve when the product is not in use.
Maintenance
Clean the dirt and oil basin during maintenance (recommended twice daily).
•
a. Avoid using corrosive cleaners, brushes, or scrapers on the stainless-steel surface, as leftover
iron particles can cause rust.
b. Do not use cleaners that contain chlorine to clean the surface.
c. Clean stainless steel surfaces with warm, soapy water, then rinse thoroughly (do not use a
high-pressure washer directly on the equipment).
If the product will not be used for a long time, clean the stainless-steel surface with a cloth dampened
•
in petrol.
Do not modify the combustion aeration room.
•
•
Turn off the oven while cleaning to prevent accidents.
EN
1- Minimum flame location
2- Maximum flame location
3- Ignition
4- Big fire
5- Close
6- Small fire
Publicité
