Publicité
Lock installation procedure
7. Screw the screw A into the lock hole 1.
8. Screwing the screw A into the lock hole 2.
9. Screwing the screw A into the lock hole 3.
10. Screwing the screw A into the lock hole 4.
11. Lock assy installation complete.
12. Put the lock cover on the lock assy and press it tightly.
Cleaning before use
Wipe the inside of the appliance with a weak solution of bicarbonate of soda. Then rinse with warm
water using a damp sponge or cloth. Wash the baskets and shelves in warm soapy water and dry
completely before replacing them.
Before plugging in
Check that you have a socket which is compatible with the plug supplied with the appliance.
DO NOT SWITCH ON UNTIL FOUR HOURS AFTER MOVING THE APPLIANCE.
The coolant fluid needs time to settle. If the appliance is switched off at any time, wait 30 minutes
before switching back on to allow the coolant fluid to settle.
32
Publicité
