Publicité
7
10
1. The necessary tools: Screwdriver, wheels, screws and casters are supplied in a box. (1)
2. Separate the wheels from the casters. (2)
3. Put package foam aside the freezer. (3)
4. Lean the device upon the foam. (4)
5. Install the wheels on the control panel side, and fix them with screws using a screwdriver. (5 &
6)
6. Completed installation of casters on the same side. (7)
7. Input the casters on the other side as the picture. (8)
8. Put on the casters as in the picture, and fix them with screws using a screwdriver. (9 & 10)
9. All casters are installed. (11)
10. Make cabinet stand.
Handle installation instructions
Your appliance is equipped with a handle that is not
installed.
To install the handle please make sure that you have all
parts: Handle, handle cover, key, lock assy
Screwdriver, screw A, screw B, lock cover
8
11
30
9
12
All parts
Publicité
