Publicité
EN CFX2 28, CFX2 37, CFX2 45, CFX2 57
• If the cooling device is connected to a DC outlet: Disconnect the cooling device and other power
consuming devices from the battery before connecting a quick charging device.
• If the cooling device is connected to a DC outlet: Disconnect the cooling device or switch it off
when you turn off the engine. Otherwise you may discharge the battery.
• The cooling device is not suitable for transporting caustic materials or materials containing solvents.
• The insulation of the cooling device contains flammable cyclopentane and requires special disposal
procedures. Deliver the cooling device at the end of its life-cycle to an appropriate recycling center.
• Do not place the cooling device near naked flames or other heat sources (heaters, direct sunlight,
gas ovens etc.).
• Do not fill the inner container with ice or fluids.
• Never immerse the cooling device in water.
• Protect the cooling device and cables against heat and moisture.
• The cooling device shall not be exposed to rain.
• To enable the refrigerant to circulate properly, the cooler may not tilted by more than 30 °. Use a
spirit level to ensure the cooler is level.
• Risk of overheating! Ensure at all times that there is sufficient ventilation on all four sides of the
cooling device. Keep the ventilation area free of any objects that could restrict the air flow to the
cooling components. Do not place the cooling device in closed compartments or areas with none
or minimal air flow.
5 Scope of delivery
Item
Quantity
1
2
3
–
6
Description
1
Cooler
1
Connection cable for DC connection
1
Connection cable for AC connection
1
Short operating manual
Publicité
