• Keep the ventilation openings on the device housing or in installations free of obstructions.
• Do not use any mechanical objects or other media to speed up the defrosting process, unless they
have been recommended by the manufacturer for this purpose.
• Do not open or damage the refrigerant circuit.
• Do not use electrical devices inside the cooling device unless they are recommended by the manu-
facturer for that purpose.
WARNING! Health hazard
• This device can be used by children aged from 8 years and above and persons with reduced physi-
cal, sensory or mental capabilities or lack of experience and knowledge if they have been given su-
pervision or instruction concerning use of the device in a safe way and understand the hazards in-
volved.
• Children aged from 3 to 8 years are allowed to load and unload refrigerating devices.
• Children must be supervised to ensure that they do not play with the device.
• Cleaning and user maintenance shall not be made by children without supervision.
WARNING! Explosion hazard
Do not store any explosive substances such as spray cans with a flammable propellant in the cooling de-
vice.
CAUTION! Electrocution hazard
• Before starting the cooling device, ensure that the power supply cable and the plug are dry.
• Disconnect the cooling device from the power supply before each cleaning and maintenance and
after every use.
CAUTION! Health hazard
• To avoid contamination of food, respect the following instructions:
•
Check if the cooling capacity of the device is suitable for storing the food you wish to cool.
•
Food may only be stored in its original packaging or in suitable containers.
•
Opening the cooling device for long periods can cause significant increase of the temperature
in the compartments of the device.
•
Clean regularly surfaces that can come in contact with food and accessible drainage systems.
• If the device is le empty for long periods:
•
Switch off the device.
•
Defrost the device.
•
Clean and dry the device.
•
Leave the lid open to prevent mould developing within the device.
NOTICE! Damage hazard
• Check that the voltage specification on the type plate corresponds to that of the energy supply.
• Only connect the cooling device as follows:
•
With the DC connection cable to a DC power supply in the vehicle
•
Or with the AC connection cable to an AC power supply
• Never pull the plug out of the socket by the cable.
CFX2 28, CFX2 37, CFX2 45, CFX2 57 EN
5