Publicité
2. Remove the 3 screws for each hinge
3. Re-fit the hinges in the new positions.
4. Insert the lid into the new hinge positions
Saving energy
Choose a well ventilated location which is protected from direct sunlight.
Allow warm food to cool down first before placing it in the cooling device to keep cool.
Do not open the cooling device more often than necessary.
Do not leave the cooling device open for longer than necessary.
If the cooling device has a basket: For optimal energy consumption, position the basket according to its posi-
tion on delivery.
On a regular basis, ensure that the lid seal still fits properly.
Connecting the cooler
Connecting to a battery
NOTICE! Damage hazard
• For protection of the device the DC cable supplied includes a fuse inside the plug. Do not remove
the fused DC plug. Only use the DC cable supplied.
• Disconnect the cooler and other consumer units from the battery before connecting the battery to
a quick charging device. Overvoltage can damage the electronics of devices connected to the bat-
tery.
(Fig.
on page 11) and take them off.
(Fig.
on page 11).
CFX2 28, CFX2 37, CFX2 45, CFX2 57 EN
11
Publicité
