Publicité
EN CFX2 28, CFX2 37, CFX2 45, CFX2 57
NOTE The cooler is equipped with an electronic system to prevent polarity reversal. The electronic sys-
tem protects the cooler against short-circuiting when connected to a battery.
The cooler can be operated with 12 V or 24 V .
Connect the cooler to a battery usig the DC connection cable as shown.
Connecting to an AC power supply
DANGER! Electrocution hazard
• Never handle plugs and switches with wet hands or if you are standing on a wet surface.
• If the cooler is operated on board a boat from an AC power supply, a residual current circuit breaker
must be installed between the AC power supply and the cooler. Seek advice from a trained techni-
cian.
NOTE
The cooler is equipped with an integrated multi-voltage power supply with priority circuit for connecting
to an AC voltage source. The priority circuit automatically switches the cooler to AC operation, if the cool-
er is connected to an AC power supply, even if the DC connection cable is still attached.
Connect the cooler to a AC power supply using the AC connection cable as shown.
12
Publicité
