Publicité
Introduction / Residual risk
Figure D:
18
Pressure gauge
19
Drain valve
20
Compressed air connection of the
compressed air tyre inflator
Trigger arm for the compressed air
21
tyre inflator
22
Clamp valve
23
Valve lock
Figure E:
24
Compressor connection
25
Quick coupling
• Technical specifications
Compressed air paint spray gun
PDLS 5 B1-1:
Working pressure:
Nozzle size:
Suction pot:
Recommended viscosity: 18–23 DIN / Sec.
Compressed air spray gun
PDLS 5 B1-2:
Working pressure: max. 8 bar
Nozzle size:
Ø 3 mm
Suction pot:
approx. 900 ml
Compressed air tyre inflator
PDLS 5 B1-3
Working pressure: max. 6 bar
Compressed air blow gun
PDLS 5 B1-4:
Working pressure: max. 5 bar
Compressed air hose:
Working pressure: max. 8 bar
Length:
5 m
24
GB/IE
Noise emission level:
Noise emission level measured according
to EN 14462. The estimated noise level in
the user's location:
Sound pressure level:
Compressed air
paint spray gun: LpA = 81.7 dB (A)
Compressed air
spray gun:
Compressed air
tyre inflator:
Compressed air
blow gun:
Uncertainty:
• Residual risk
max. 5 bar
Even if you operate the devices as intended,
Ø 1.5 mm
there will be residual risks. The following
approx. 1000 ml
dangers may occur in connection with the
build and design of this air compressor set:
„
„
Reduce the risk by carefully using the devices
as intended and observing all instructions.
Keep the packaging material out of reach of
young children. There is a risk of suffocation!
LpA = 85.4 dB (A)
LpA = 84.4 dB (A)
LpA = 86.1 dB (A)
KpA = 2.5 dB
Danger from whipping compressed
air hoses
Danger of falling from compressed
air hoses lying around
PLEASE NOTE!
f After unpacking the product, please
check that all of the package contents
are present and that the devices are in
perfect condition. Do not use devices if
they are defective.
Publicité
