Publicité
Installation Requirements
02
A
Installation angle
C
Installation angle
(7.56 in.)
415mm
(16.34 in.)
192mm
(6.89 in.)
175mm
03
Installing the Inverter
A
Dimensions for drilling holes
（4.33 in.） （ 4.72 in.）
110mm 120mm
120mm
（4.72 in.）
359mm
（14.13 in.）
150mm
（5.91 in.）
70mm 70mm
（2.76 in.）
（2.76 in.）
Avoid drilling holes in walls with cables inside or on the back.
WARNING!
Évitez de percer des trous dans les murs qui avec des câbles à
AVERTISSEMENT！
l' intérieur ou à l' arrière.
B
Installation space
500mm
(19.69 in.)
(7.87 in.)
(7.87 in.)
(11.81 in.)
200mm
200mm
300mm
(11.81 in.)
300mm
(19.69 in.)
Upward----------500mm
(11.81 in.)
Downward------300mm
(11.81 in.)
Front--------------300mm
(7.87 in.)
Both sides-------200mm
B
Fix the wall bracket
Wall -mounted bracket
Expansion bolts
C
Install the inverter
E
Inverter could be locked for anit-theft
04
Conduit Wiring And Installation
Before starting installation or commissioning A-MS , please read the
DANGER!
statements as below carefully.
DANGER!
• During wiring connection, the operator should always wear proper
PPE.
• Installation and commissioning must be performed by a licensed
electrician in accordance with local, state, and National Electrical
Code ANSI/NFPA 70 requirements.
• The method and process of installing and wiring connection must
comply with all US National Electric Code (NEC) requirement and
local AHJ inspector requirements in the Unite States. Meanwhile in
Canada, method and process must comply with Canadian Electric
Code: Part I and Part II, and the local AHJ inspector requirements.
• The wiring installation must strictly observe correct specification.
Otherwise, it may bring waterproof and electrical problems.
D
Fasten screws
Publicité
