Publicité
1. When seated, turn the knob clockwise to activate the front washing function, and turn
it counterclockwise to activate the rear washing function. Both the rear and front washing
functions will automatically transition to the drying function once completed. (Note: The
default settings for water pressure, water temperature, air temperature, seat temperature,
and wand position are intermediate.)
2 . When no one is seated, turn the knob clockwise to start manual cleaning function
of the nozzle.
3. During the rear and front washing functions, turn the knob clockwise to move the spray
wand forward and counterclockwise to move it backward. To adjust the water pressure,
long press the knob; turning it clockwise increases the water pressure while turning it
counterclockwise decreases it. (Note: While washing, long press the knob to switch
between adjusting the water pressure and the spray wand position.）
4. During drying, clockwise rotation increases air temperature and counterclockwise
rotation decreases air temperature.
5. In functional mode, press the knob to stop the function in progress: rear washing, front
washing, drying or nozzle cleaning. In addition, press the knob to flush the toilet.
6. To enter into standby mode, press and hold the knob.
7. To enter into functional mode, press and hold the knob.
Below shows the indicator light status:
Functional mode: White light;
Energy saving mode: Breathing light;
Standby mode: Light off.
* Default settings for all functions are intermediate when powering on. Use remote control
to switch to the function level set before.
17
Description of the knob function
www.woodbridgebath.com
Publicité
