Publicité
1. Turn on the angle valve
• Check the threaded connection for leaks to ensure complete sealing. Turn the angle
valve counterclockwise to the full open position.
(Note: The angle valve opens with a large torque for the first time.)
2. Plug in Connection
• Insert the leakage protection plug into a power socket, press the reset switch, and the plug
indicator lights up, indicating that the power is on.
Note:
Press the test button before usage, the reset
switch pops up indicating that the leakage
protection function is normal.
Press the TEST button (then the RESET button)
every month to ensure proper operation
* Only for models with leakage protection plugs.
* Please refer to the actual product.
3. Self-inspection
a. Once power is connected, the buzzer beeps. The knob lights up in white, and the
self-inspection starts.
b. The buzzer beeps again, then the self-inspection completes.
c. The product is ready to use.
13
Angle valve
.
www.woodbridgebath.com
Preparation
Indicator light
REMETTRE
Reset switch
RESET
Current detection
test button
TEST
Publicité
