Publicité
4. Mounting bracket installation
• Assemble the mounting bracket with
bolts and then install them to the
pre-installed flange plate on the ground
and lock tight with nuts.
Washer
5. Ceramic toilet installation
• Install a sealing flange into drain outlet.
• Install ceramic toilet on the corresponding
position.
Note:
1. Two people are required to carry the toilet.
2. Please clean up the drain outlet;
3. Please make sure ceramic toilet outlet sits
perfectly on drain outlet.
11
6. Screw installation
• Put the screw through the fixing sleeve
Mounting bracket
• Install the decorative cap on the fixing
Nut
Bolt
7. Connect the hoses
• Connect the water inlet and angle valve
Toilet drain
outlet
Sealing flange
www.woodbridgebath.com
Toilet installation
and then install it through the holes (on
both sides of the toilet ceramic) to the
mounting bracket on the ground. Lock
tight.
sleeve.
Fixing sleeve
Decorative cap
of the toilet with the matching hose and
tighten it.
Connect the water inlet
hose of the toilet seat
Connect the water supply
hose of the toilet tank
Screw
Publicité
