KitchenAid KBFU271 Instructions D'installation Et Guide D'utilisation Et D'entretien page 3

INSTALLATION REQUIREMENTS
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools needed
• Level
• Phillips screwdriver
• Short Phillips screwdriver or a 90 ° screwdriver with a Phillips
screw bit
• Tape measure
• Slip-joint pliers
• Pipe wrench
• Adjustable wrench
Parts needed
• NSF or UPC listed water connection lines or hose
• All weather clear silicone
IMPORTANT: Observe all governing codes and ordinances.
Product Dimensions
Freestanding Models
The freestanding model must have suitable drain systems in
accordance with local codes for the ice bin and sink drains.
B
Built-In Models
C
D
C
A. 26%" (67.0 cm)
B.30" (76.2 cm)
C. 10"
(25.4 cm)
D. 223/4 '' (57.8 cm)
Cabinet Dimensions (for built-in model)
Provide suitable drain systems in accordance with local codes for
ice bin and sink drains. The drains and filter must be accessible.
A. 171/4 '' (43.8 cm)
B. 30" (76.2 cm)
C. 36%" (93. 7 cm)
D. 26%" (67.0 cm)