Decathlon ROCKRIDER E-ST500 2022 Notice D'utilisation page 33

SPEED AND CONTROL ELEMENTS
Display screen and function
Pedal-assist mode:
1 «1'' mode is the default assistance mode when the screen is switched on.
- The engine output will adapt according to the mode selected
- The engine output for the different modes is set out below:
Mode
Maximum assistance speeds***
For example, for a 100 W effort,
the final power will be:
ON/OFF button:
2
Long press: Turn on electric-assisted bike.
«+» button:
3 Toggle between the different pedal-assist modes.
Press and hold down: Activation of walk mode.
This mode allows you to push the bike and walk beside it at a maximum speed of 6 km/h.
«-» button:
4 Short press: Toggle between the different pedal-assist modes.
Press and hold down: Turns lights on and off.
Lights on by default.
Bouton Paramètres / Information
5
Short press = Switch values
Long press = Enter settings menu
Battery level
6
Battery status
* Under test protocol conditions, for a rider weighing 75 kg with tyre pressure of 1.8 bar and following B'twin's 10
guidelines.
2
1
3
4
6
5
off
/
/
7
1 2
+ 60% + 120%
160W 220W
3
+ 280%
380W