ECOVACS WINBOT W2 PRO OMNI Manuel D'instructions page 22

6. If the Station is charging while WINBOT is working, the Station's
charging speed will be significantly slower compared to when
WINBOT is idle. At room temperature (10-40° C), this results in an
estimated charging time of more than 6 hours.
Advanced Features
To enjoy all available features, it is recommended to control your
WINBOT via the ECOVACS HOME App.
a. Multiple Cleaning Modes
Thorough Cleaning: A denser cleaning path with edge cleaning for
thorough and complete cleaning.
Deep Cleaning: A dense cleaning path for removing heavy dirt.
Fast Cleaning:
Fast cleaning for removing light dirt.
Edge Cleaning: Dedicated edge cleaning for clearing residue in
corners and edges.
Split Zone Cleaning:
Left and right partitioning, suitable for larger
glass surfaces (supports up to 8 meters in width, with windows on
both sides).
Heavy-Duty Cleaning: Segmented wiping, efficiently removes heavy
dust, suitable for large areas with high dust accumulation.
Troubleshooting
Do not panic when WINBOT alarms. Go to app for a comprehensive
troubleshooting guide.
c. Omni-directional Navigation
In the app, you can use the round D-pad to control WINBOT. This
feature supports WINBOT navigation from both the front and bottom
view; 360° navigation, spot cleaning, and manual water spraying.
EN 22
① Scan the QR code on the Station or at the bottom of WINBOT to
download and install the ECOVACS HOME App.
② Open ECOVACS HOME App to scan the QR code on the Station and
follow the wizard to connect WINBOT.
OR
ECOVACS HOME