ECOVACS WINBOT W2 PRO OMNI Manuel D'instructions page 15

Turn ON Station and WINBOT
2
Press and hold the Power button on the Station for at least 2 seconds
to turn on Station and WINBOT.
The Station operates in two modes:
1. Standalone mode: It uses its built-in battery to power WINBOT.
2. Plugged into a socket: It uses its built-in adapter to power WINBOT
while slowly charging its own battery. Refer to the
details on how to charge.
* If WINBOT is powered on but Fan is not working, WINBOT will shut
down after 10 minutes of inactivity. To resetart, press and hold the
Power button.
3
It is recommended to use tap water. The maximum volume of the
Water Tank is about 60 ml, and a full tank can sustain spraying for
about 60 minutes. In Fast Cleaning mode, a full tank can cover an
area of approximately 30 ㎡ .
Storage section for
Fill up the Water Tank
Maximum: 60ml
15 EN