ECOVACS WINBOT W2 PRO OMNI Manuel D'instructions page 19

fully dropping down, it will reduce the Suction Cup's ability to attach
securely.
Maintenance during Cleaning
5
For heavily stained glass, wash or replace the Wiping Pad multiple
times and clean the four Spherical Sensors in time.
* Clean the Wiping Pad in time and make sure that any small particles
on it are completely removed to avoid scratching the glass.
Finish Cleaning
6
Finish Cleaning When WINBOT is Working
1. Press and hold for 2 seconds or more, then WINBOT will
immediately halt its current task, return to its Initial Spot, and wait to
be removed.
2. Press and hold the on WINBOT for 2 seconds or more to stop
the fan. Then, take WINBOT off according to voice prompts.
Finish Cleaning when Cleaning Task is Completed
After finishing the cleaning task, WINBOT will automatically return to
its Initial Spot and wait to be removed.
Press and hold on WINBOT for 2 seconds or more to stop the
fan. Then, remove WINBOT according to voice prompts.
* When removing WINBOT, firmly grasp its handle to prevent accident
falling.
19 EN