Publicité
maintenance
EN
12.4 glass / door replacement
WARNING
!
•
Do not use substitute materials.
•
Glass may be hot. Do not touch glass until cooled.
•
Care must be taken when removing and disposing of any broken door glass or damaged components. Be
sure to vacuum up any broken glass from inside appliance before operation.
•
Do not strike, slam, or scratch. Do not operate appliance with glass removed, cracked, broken, or scratched.
Replacement glass/frame assembly shall be replaced as a complete unit as supplied by the appliance
manufacturer.
12.3 night light replacement
Lights: To replace the halogen bulb in your appliance
you must first remove the lens from the light housing.
THIS TEMPLATE MUST BE USED WITH 38.1
To remove the lens from the housing, remove the
screw securing the housing in place (Fig. 1).
Snap the lens out of the housing (including the metal
bracket) (Fig. 2). Do not touch the halogen bulb with
your bare hands.
The oil from your fingertips will reduce the life of the
bulb. With gloved hands gently pull the old bulb from
the socket and replace with the new bulb. Reinstall the
lens, by snapping it back into the housing and bend
the tabs on the front of the housing back in to position.
(Fig. 2)
60
W415-2920 / D-0 / 10.25.24
Metal
bracket
38.1
38.1.1
(Fig. 1)
(Fig. 3)
Gloves
Publicité
