Publicité
7
8
9
10.8 log placement
10
WARNING
!
•
Failure to position the logs in accordance with these diagrams or failure to use only logs specifi cally approved
with this appliance may result in property damage or personal injury.
•
Logs must be placed in their exact location in the appliance. Do not modify the proper log positions, since
appliance may not function properly and delayed ignition may occur.
•
The logs are fragile and should be handled with care.
PHAZER™ logs and glowing embers, exclusive to Napoleon, provide a unique and realistic glowing effect that is dif-
"PHAZER™ logs [and glowing embers], exclusive to Napoleon/Continental, provide a unique and realistic
ferent in every installation. Take the time to carefully position the glowing embers for a maximum glowing effect. Log
glowing effect that is different in every installation. Take the time to carefully position the glowing embers for a
colours may vary. During the initial use of the appliance, the colours will become more uniform as colour pigments burn
maximum glowing effect. Log colours may vary. During the initial use of the appliance, the colours will become
Air Flow Cover
Air Flow Cover
in during the heat-activated curing process. Blocked burner ports can cause an incorrect flame pattern.
more uniform as colour pigments burn in during the heat-activated curing process."
Insert only if
Stud
Stud
applicable ---->
IF APPLICABLE, INSERT DRAWING OF BURNER/SUPPORT WITH APPROPRIATE LA-
A1
A1
BELS (I.E. STUDS, PILOT SHIELD, BURNER PORTS, ETC.).
Log Number
Air Flow Cover
IF NOT APPLICABLE, HIDE THIS SECTION AND USE BOXES BELOW.
1
Burner Ports
Burner Ports
2
3
Stud
A1
4
5
6
7
Burner Ports
8
9
10
note:
The logs are numbered for illustrative purposes only according to the order in which they are to be installed.
Pilot Cutout
Pilot Cutout
1
1
IF APPLICABLE, INSERT DRAWING OF BURNER/SUPPORT WITH APPROPRIATE LA-
Pilot Cutout
PLACE TEXT BOX HERE.
IF NOT APPLICABLE, HIDE THIS SECTION AND USE BOXES BELOW.
NOTE: ENSURE NOMENCLATURE IS
1
CONSISTENT THROUGHOUT.
Bump-out
Bump-out
Notch
Notch
1
1
If applicable, insert the following statement:
Burner Pan
Burner Pan
note:
Log numbers are located on the bottom or back of the logs.
Burner Pan
Part Number
Burner Overview
Burner Overview
BELS (I.E. STUDS, PILOT SHIELD, BURNER PORTS, ETC.).
Pilot Shield
Pilot Shield
Pilot Shield
Description
Lower Media Tray
Lower Media Tray
Lower Media Tray
1
1
2
2
A1
A1
PLACE TEXT BOX HERE.
NOTE: ENSURE NOMENCLATURE IS
1
CONSISTENT THROUGHOUT.
2
Bump-out
Bump-out
A1
Notch
Notch
1
1
finishing
EN
Air Flow
Air Flow
Cover
Cover
Stud
Stud
Air Flow
A2
A2
Cover
Stud
A2
A2
A2
A2
53
W415-2920 / D-0 / 10.25.24
Publicité
